Handsome Holiday Flip

Hey, sweet friends! Welcome! I've missed connecting with you all here, but you know...life! I hope your Thanksgiving was wonderful and that you're enjoying this time of year at a pace that feels right. I know that's different for us all but as I'm getting a wee bit older every year I'm learning that what I choose to take on doesn't have to be the status quo. This season with all of our children in school for the first time still feels fresh and new and I've found that the adrenaline I used to have to get things done in a pinch while juggling our brood of multiples has leveled out a bit. Still, I wrestle with that desire for busy-ness and the Lord has been teaching me quite a bit about Himself in the constant ebb and flow.

One of my joys that's carried over into this new season of life continues to involve thrifting and flipping furniture finds! Today I've got a handsome flip I finished recently - an unexpected score from an unexpected thrift stop. Those finds are my favorite. I never seem to find what I'm looking for, but I always find what I'm not looking for. (I got your line, song writers).

He's a dapper tallboy, isn't he! He started off an orange-y stain which really wasn't doing his brass pulls justice. And we just can't resist good brass around here! I wanted to create a bit of contrast against the brass with a crisp white coat of paint, but left his base wood. White + wood + brass has been my favorite refinishing combo these past few years; it's a timeless classic especially if you want to maintain the integrity of an older piece.

He was also a bit petite when I found him since he didn't have any legs to stand on. Thanks to a set of tapered legs my dear Cate had on hand and graciously gave me for this project, he has a bit more presence now. Tell miss Cate 'thank you', my handsome boy!

I'm really enjoying seeing the versatility of tallboys lately! In a smaller home or apartment these work beautifully as a bar, buffet and storage piece in a dining room. They don't take up a large footprint so they're fun to move around and play with here and there. :)

Two-Tone and Brass Tallboy
48.75"H x 32"W x 19"D
$395
Contact chelsea@stylemutthome.com if interested in this piece or a custom order like it!

Thank you all for stopping by! I'll be back next week with a holiday home tour to share with you!

DIY (aka Frankensteined) Chandelier || Flip List Item No.3 ||

Happy Halloween Style Mutts!  As you may well know that this summer, I made lofty promises that I would soon be posting a BIG REVEAL of my 2016 Furniture Flip Bucket List item No.3...   Well, the end of October may not classify as "soon" exactly but what better day for a reveal of a frankensteined chandelier than all hallows eve?

God must've had a good chuckle when I ended my post back in July with "I'm still working on the wiring for the sputnik chandelier and [if all goes well] will be sharing the results soon!"  Unbeknownst to me, He obviously knew I was in for a wild electrical wiring ride, a puzzle of a mounting mechanism, and a treacherous install while balancing on the back of our couch.

Before we continue, let's pause for the obligatory disclaimer: I am not an electrician.  I built, wired, and installed this light fixture at my own risk.  If you are interested in building, wiring, or installing your own light fixture - please do EXTENSIVE research before you lift a finger and consult a professional electrician.

We good?  We good.  

Ok so this project started when I found an old foyer lantern in August 2015.  The bulb apparatus inside was so cool!  The staggered lengths.  The brass finish.  I harvested what looked useful and repurposed the glass shell as an umbrella stand.  Now that I had the arms for a sputnik light, I needed to find a body.  I was considering building an angular wooden skeleton that I could route wires through until I found a quirky mid-century modern table lamp for a whopping $15.

The lamp's hollow brass square rod was perfect!  I officially had what I needed to build the frame.

And in case you're wondering, the rest of the table lamp didn't go to waste either.  It became a plant stand:

Making the complete family tree as such:

So at this point, I'm staring at the light-less frame of what could be a really cool chandelier after over a year of planning and I. Am. Stuck.

First off, the hollow cavity in the brass rod I took from the MCM lamp was very very narrow.  I tried splicing the existing wires from the foyer light bulbs and running those up through the rod.  When I finally hooked it up to a plug in socket to test it, only half of the bulbs were working.  

We need more power Igor!

Ruling out a dead light bulb or two, I had to disassemble the entire thing and start from scratch.  After consulting a professional at the Lamp Factory Outlet in Fairfax, Va, I learned that I needed to buy a new sockets for the faulty foyer bulb arms.  They were so cheap (like $2 each) that I order a new one for each of the arms (just to be safe) and picked up some new 16 gauge stranded copper wire from home depot.  I bought the wire in both black and white so I could keep my hot (black) and neutral (white) connections straight for when it came time to install.  

When I was researching all these issues, I found this tutorial by ModFruGal to be very thorough and helpful.  Plus - they have a shopping list if you a building a brass arm chandelier from scratch instead of going all Dr. Frankenstein on some poor lamp parts.

Once got all the sockets working and threaded the 8 wires (one black and one white per socket) through the center piece, I then had to conjure up a way to cap the center cavity with a chandelier ring to attach the chain to.  When working with your standard light, a chandelier ring would simple screw in to the top of your fixture.  But this was not standard light and I had to figure out how to secure a round peg in a square hole.  Now here is where I MUST reemphasize to not do this at home without consulting a professional first...

I glued it on.  I know - not the best solution.  I tried metal epoxy and couldn't get a strong enough connection for it to set.  I ended up straight up gorilla gluing it.  And it's working great so far.

Ok.  So now I have a fully wired brass lamp frame (we did it Igor!) but still have to figure out how to install it.  Caleb and I are still renting so whatever we did, it had to be reversible.  Luckily Home Depot has an awesome recessed can light conversion kit by Westinghouse and our apartment has a can light directly above our dining room table.  The kit was really easy to install thanks to a handy step-by-step video.  

Source: Home Depot

This is where it gets a little hairy to explain.  Not everyone will have the unique problems that I encountered  in my non-standard chandelier install, so for your sake, I'll spare you the details.  But you can always email me for more troubleshooting deets if you are somehow in a similar pickle.

Even with all my planning and sketching, I didn't have a solid plan for the mounting plate.  Luckily I don't often throw things away and I still have the leftovers from the original foyer lantern that started this whole thing.  Inside the lantern was a round plate with four holes for each arm and one in the center.  

I only needed the hole in the center to thread the wires through the chandelier loop at the other end of the chain.  But the extra holes did end up coming in handy. They allowed me to screw the mounting plate onto to the brace assembly from the can converter kit,  After it was secure and I could pull my screwdriver out, I capped the four extra holes with some threaded nipples, a few nuts, and four brass finishing caps,

Ok.  Enough tech talk.  Let's get to the juicy reveal already!!!

In all my mad-sciencing, I didn't think to account for the balance of the varied brass arms.  

But I don't even mind that he doesn't hang straight - it gives him an angular mid-mod playful vibe.  And hey - Frankenstein's monster wasn't perfect either.  He could only say yaaaaaaaaaaaaaaaaaaaaaarp after all.

Alright Igor - flip ze switch!

So all in all this project was a monster to gather, a monster to build, and a downright monster to install!  But when it was all said and done, I still only spent a little over $100 on this project.  Although that's a little higher than I like to spend for pieces in our own home, this was still a winner in my book compared to buying new.

Stay safe trick -or-treating out there tonight friends!  And if you need something to binge read while you're raiding your candy haul, catch up on the other completed furniture flip bucket list items:

Industrial Bench

Remember these puppies er... ponies?

When I bought them, I thought I would make a massive desk supported by both sawhorses.  But their size length would make for a desk with a HUGE footprint (and quite possibly too large to appeal to potential buyers).  So I split up the set and used only one to make a narrower desk complete with a hutch and detachable lamp.

As for the other sawhorse, I was stumped.  Fortunately when I get myself into these kind of conundrums, I have a secret weapon: I call Chelsea in for a consult.

Now the LORD knew what He was doing pairing me up with such a creative and supporting business partner.  She took one look at them and said, "What if you make an industrial bench?"

Genius.

Chelsea lent me her hacksaw so I could cut down the legs of one of the sawhorses to the right height.  I combined both pieces of storied wood from each sawhorse into one bench surface and remounted it on the galvanized metal base.  

I just LOVE the saw and paint streaks - it makes me wonder what projects these sawhorsed saw(ed) in their day. 

See (saw) what I did there? 

Ijustcanthelpmyself.

So what magical rugged loft did I drag my new bench to for the perfect industrial backdrop?  Where else do I stage my pieces these days...

Now, if you're clever and observant (which I'm sure you are) you may be thinking to yourself, "Cate, when did your garage get a brick wall?  All of your other staged pieces have always had regular old drywall as the backdrop..."

Clever, clever you.

Take a closer look at the photo - did I fool you?  Or are you onto my little ruse?

It's not brick, it's wallpaper.

I'll admit, I was skeptical about using a 2D wallpaper to make a 3D effect.  I don't often go for faux unless it's really convincing - but I live in a new(ish) apartment complex that doesn't have old charm in spades.  Cue Milton & King Wallpaper.  (Remember this wall hanging giveaway using their Gluttony print?)  Well they were generous enough to also send me a roll their very popular Soft White Bricks.

And I was surprised to see just how believable the pattern was even in person!  The only way you would know it wasn't brick would be to run your hands along it expecting to feel a gnarled texture and instead finding it's baby smooth.  

Disclaimer - I do live in a rental so I couldn't bring myself to install wallpaper only to take it down in a few months when our lease is up.  I just tacked up the panels and used wood trim to hide the seams that would otherwise be invisible if the paper had been glued.  (Plus it adds a little architectural interest.)

And just because it's Fall (and I'm obSESSED with cooler, crisper weather), I used my favorite fall accessories for this shoot. 

Thank you Milton & King for opening my eyes up to the wonders of high-quality wallpaper prints!  One of these days I'm going to have to get my hands on your Marble and your Dandelions prints.  (Insert 17 heart-eye emojis)

It's only fitting that this industrial bench ended up in a cool DC apartment.  That's right!  If you've been following along with us you may recognize this bench from yesterday's eDesign reveal:  

May he forever grace our client's moody dark green hallway!